Exhibit Design Search / Trade Show and Event Tips / Fine-Tune Your Trade Show Knowledge /

10 Tips for a Successful Installation and Dismantle

Installation and Dismantle Tips

The trade show floor can be like operating in a foreign country. However, if you follow a few basic tips, you can successfully and economically navigate the Installation and Dismantle waters of your next show.

1. Choose a Quality Labor Partner

  • Consider national coverage so you have consistency
  • What is their reputation for integrity and performance –ask around
  • Price – While cost per hour is important, keep in mind that comparing the rate of an independent contractor to a general contractor (GC) is not comparing apples to apples. Independent contractor labor is typically far more efficient, thereby resulting in few hours billed

2. Complete the Exhibitor Appointed Contractor Letter (EAC Letter)

  • Check your exhibitor services manual for the due date. This is typically 30 days prior to the show – but can be as much as 90 days
  • Complete the form, send it to the show contractor and send a copy to your labor contractor
  • If it is past the due date, call your labor contractor. They may be able to work it out with the show

3. Choose the Right Shipper

  • Choose an experienced trade show shipping partner
  • Price – Do not compare the price of shipping with a van line (point to point transportation) to that of a common show carrier (consolidates loads, breaks down skids, rough ride). They are not equal.
  • Label each item on a skid separately. Skids sometimes get broken down

4. Pre-Plan

  • Complete all service orders well in advance (electrical, carpet, hanging signs, material handling, etc.) to get best rates
  • Electrical – Be sure to include a dimensioned layout of where the electrical should go, along with an orientation for your booth (include surrounding booth numbers)
  • Send copies of all service orders to your labor partner

5. Have Set Up Instructions and Booth Renderings

  • Be sure to have detailed and accurate set up instructions
  • Send a copy of the instructions to your labor partner in advance
  • Bring a copy of the instructions with you
  • Have back up copies of your booth drawings at your office

6. Schedule Labor – Factors to Consider When Choosing Start Times

  • Scheduled the move-in time for your booth # – Find this on the targeted move in plan or in your exhibitor services manual
  • Some cities and venues take longer to get the freight from the dock to the booth than others – ask your labor partner
  • Direct shipment or advanced shipment – You can generally begin set up at or close to your targeted move in time only if you send your booth to the Advanced Warehouse.
  • Leave time for the electrical and carpet to be laid if you rent from the general contractor. Idle crew hours are the responsibility of the exhibitor if mis-scheduled. Independent contractors are happy to help you eliminate idle time by consulting with you in advance.

7. Union Jurisdictions -- Every City is Different

  • Read the rules in your Exhibitor Services Manual
  • In some cities you can set your own booth up – in others you can do almost nothing
  • For detailed information on a city by city basis, request union jurisdiction guidelines from your local exhibit professional.

8. Security Concerns

  • Theft is common in convention centers
  • If it is valuable – keep it locked up. Many people have access to the show floor. Your labor partner can not be responsible for your valuables

9. Have an Inventory List

  • Have a complete list of crates and inventory for inbound and outbound
  • If the outbound shipment is split, have a detailed inventory of which items ship to each destination
  • Provide this list to your labor partner.

10. Supervision

  • A supervisor who knows the details of your exhibit and also how the unions in that city operate will save you time, money, and frustration
  • The supervisor must remain at the booth throughout the entire installation and dismantle

Momentum Management Inc. has been a national provider of outstanding installation and dismantle labor for over 18 years. We would welcome an opportunity to help you be a success on the show floor.

For more information about trade show or event marketing, give us a call or Contact Us. We welcome the opportunity to assist you with your next show.

Article Author:

Mel White, CEI

Add designs and photos to your personal gallery simply by clicking on the +My Gallery links

Then email your "My Gallery" to colleagues, friends, or your favorite exhibit designer. There's no better way to begin designing a display that reflects your exhibit marketing goals.

Note: My Gallery uses a temporary browser cookie to store your gallery. We recommend that you send your gallery to your email address if you need to retain it for longer than 30 days.

  • Suggested lead times may vary depending on current orders. Please check with Customer Service.
  • Production lead times are based on business days and DO NOT include any shipping days.
  • Production-ready artwork (when applicable) must accompany the order confirmation. Delays in uploading artwork may lead to expedited charges or shipping changes.
  • No order will be released to Production without a signed order confirmation.
  • Shipping is based on the availability of materials and graphics. Additional charges may apply if materials or graphics must be expedited.
  • Standard lead times do not apply to orders of multiple quantities.
Exhibit Weight varies depending on the packaging and the shipping method. Variables include but are not limited to:
  • Dimensional Weight vs. Actual Weight: Dimensional weight is defined as crate or case size. On most air shipments, the dimensional weight exceeds the actual weight
  • Portable Cases vs. Wood Crates or Molded Tubs (where applicable): Exhibit designs that require one wood crate would require multiple portable cases. Selecting one vs. the other affects the total weight (dimensional or actual).
  • Freight Carrier: LTL carriers (Less than Truckload) quote freight based on space used. UPS, FedEx, and air freight carriers quote freight based on either the dimensional or the actual weight of the shipment.
  • Freight Service Level (number of days): Service levels range from Same Day Delivery to Two Week Delivery.
For more information about exhibit weights and freight options, please contact your local exhibit representative.
Electrical, Cord, and Wire Management varies depending on the display and each exhibitor's requirements. When ordering your trade show display, consider the following electrical/wire management issues and discuss your options with an exhibit professional:
  • Inline vs. Island Displays
  • Lead Retrieval Devices
  • Computer and Monitor Cables
  • Demo Equipment
  • Overhead Lighting
  • Grommets and Grommet Placement in Counters
  • Overhead vs. Floor Power Supply
  • Flooring and Electrical Wiring
  • Options for Hiding Cords and Cables
  • Flat vs. Round Electrical Cords
  • Multi-Plug Outlets and Extension Cords
By reviewing your wiring options BEFORE you order your display, you'll save TIME and MONEY and ensure your exhibit exceeds your expectations and your installation is trouble-free.

Contact Us

American Image Displays
4054 148th Ave NE,
Redmond, WA, 98052
Monday-Friday, 8:00am - 4:00pm PST

Providing Trade Show Displays since 1983

HTML tutorial
American Image Displays BBB Business Review EDPA Logo us veteran owned business logo